Console: 16 point font, 400 scans
Console: colour VGA+ 80x25, 1 virtual console (max 63)
pcibios_init : BIOS32 Service Directory structure at 0x000fdb70
pcibios_init : BIOS32 Service Directory entry at 0xfdb80
pcibios_init : PCI BIOS revision 2.10 entry at 0xfdba1
Probing PCI hardware.
Calibrating delay loop.. ok - 149.50 BogoMIPS
Memory: 63040k/65536k available (608k kernel code, 384k reserved, 1172k data)
Swansea University Computer Society NET3.035 for Linux 2.0
NET3: Unix domain sockets 0.13 for Linux NET3.035.
Swansea University Computer Society TCP/IP for NET3.034
IP Protocols: ICMP, UDP, TCP
VFS: Diskquotas version dquot_5.6.0 initialized
Checking 386/387 coupling... Ok, fpu using exception 16 error reporting.
Checking 'hlt' instruction... Ok.
Linux version 2.0.30 (root@bluenote.local-linux.net) (gcc version 2.7.2.1) #8 Sun Jun 15 12:54:38 CDT 1997
Serial driver version 4.13 with no serial options enabled
tty00 at 0x03f8 (irq = 4) is a 16550A
tty01 at 0x02f8 (irq = 3) is a 16550A
Sound initialization started
 at 0x220 irq 5 dma 1,5
Sound initialization complete
Ramdisk driver initialized : 16 ramdisks of 4096K size
ide: i82371 PIIX (Triton) on PCI bus 0 function 57
    ide0: BM-DMA at 0xffa0-0xffa7
    ide1: BM-DMA at 0xffa8-0xffaf
hda: WDC AC32100H, 2014MB w/128kB Cache, LBA, CHS=1023/64/63, DMA
hdb: WDC AC32500H, 2441MB w/128kB Cache, LBA, CHS=620/128/63, DMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
md driver 0.35 MAX_MD_DEV=4, MAX_REAL=8
scsi : 0 hosts.
scsi : detected total.
eth0: 3c509 at 0x300 tag 1, AUI port, address  00 20 af 3b df 99, IRQ 9.
3c509.c:1.07 6/15/95 becker@cesdis.gsfc.nasa.gov
Partition check:
 hda:Started kswapd v 1.4.2.2 
 hda1 hda2 hda3 < hda5 hda6 > hda4
 hdb: hdb1 hdb2
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
aic7xxx: BurstLen = 8 DWDs, Latency Timer = 64 PCLKS
aic7xxx: devconfig = 0x580.
aic7xxx: Reading SEEPROM...done.
aic7xxx: Extended translation enabled.
aic7xxx: Memory check yields 16 SCBs, paging not enabled.
AHA-2940 (PCI-bus), I/O 0xec00, Mem 0xffafb000:
    irq 10
    bus release time 40 bclks
    data fifo threshold 100%
    SCSI CHANNEL A:
        scsi id 7
        scsi selection timeout 256 ms
        scsi bus reset at power-on enabled
        scsi bus parity enabled
        scsi bus termination (low byte) enabled
aic7xxx: Downloading sequencer code...done.
aic7xxx: Resetting the SCSI bus...done.
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 4.0/3.2/4.0
scsi : 1 host.
scsi0: Scanning channel A for devices.
scsi0: Target 3, channel A, now synchronous at 10.0MHz, offset 15.
  Vendor: SEAGATE   Model: ST32430N          Rev: 0510
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 3, lun 0
scsi0: Target 6, channel A, now synchronous at 5.0MHz, offset 15.
  Vendor: SONY      Model: CD-ROM CDU-76S    Rev: 1.1c
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4197405 [2049 MB] [2.0 GB]
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
VFS: Mounted root (ext2 filesystem) readonly.
Trying to unmount old root ... okay
Adding Swap: 44348k swap-space (priority -1)
Swansea University Computer Society IPX 0.34 for NET3.035
IPX Portions Copyright (c) 1995 Caldera, Inc.

Last Modified:   13 October 1997 St. Louis Unix Users Group - Linux SIG